I have a S-74 feeder with an AlumaPro Plus gun. Running 3/64 5356 wire. Welding 5250 plate 1/4" thick. XMT 304 power. No Pulse.
I would like to improve the hot start settings so that I get less cold lap at weld starts and tacks.
Could anybody share the settings that they use? and why?
Results 1 to 1 of 1
02-14-2013, 05:29 AM #1Junior Member
- Join Date
- Feb 2013
Hot Start settings: S-74 with AlumnaPro Plus