I was noticing on my S64 Wirefeeder, that there is a slot for a Data/Memory Card. What type of information can be stored on this card?
According to the Miller manual for the feeder, the part number is 155-910.
Does anyone have an inexpensive source for a card?
Thanks,
Results 1 to 5 of 5
Thread: Data Card for S64M Wirefeeder
-
03-31-2010, 01:34 PM #1
Member
- Join Date
- Dec 2009
- Location
- Streamwood, IL
- Posts
- 83
Data Card for S64M Wirefeeder
_kevin
Syncrowave 250 Analogue
Maxstar 200SD
Maxtron 450
IntelliTIG 40
S64M Wirefeeder
Non-Blue:
Hypertherm PowerMax 1000G3
Lincoln Precision Tig 275
Lincoln WeldPak 155
-
03-31-2010, 01:40 PM #2
Senior Member
- Join Date
- Dec 2009
- Location
- Midwest
- Posts
- 581
It can store a variety of programs for your machine.
Here's the bad news....
They cost a crapload of money. Several hundred dollars.
A guy on ebay had several of them some time ago & I missed the boat on them.
Sold them for next to nothing. They were new never been used.
For most applications, you'll never need them tho.So you're telling me...You're not nostalgic? Then, give me another word for it......
-
03-31-2010, 02:32 PM #3
Senior Member
- Join Date
- Feb 2004
- Location
- Boulder, Colorado
- Posts
- 474
You can store programs and, more importantly, edit pulse parameters. We do that alot. My customer doesnt like the factory pulse parameters for solid stainless mig.
Funny, they even dumped their new RMD pipepro for an older 64M and 456 because of the programability of the pulse parameters.
I may have a spare card somewhere....
-
03-31-2010, 07:56 PM #4
Senior Member
- Join Date
- Dec 2009
- Location
- Midwest
- Posts
- 581
If you have more than one & wanna do some swapping, let me know. I got about 14 64M heads in various states of completion. I even have several brand new tach boards for the standard 24 volt motors.
Originally Posted by GTA/SPEC
Parts galore for them if you know anyone looking. The price is right.
So you're telling me...You're not nostalgic? Then, give me another word for it......
-
02-12-2013, 12:43 PM #5
Member
- Join Date
- Feb 2012
- Posts
- 43
Originally Posted by 7A749
If you have more than one & wanna do some swapping, let me know. I got about 14 64M heads in various states of completion. I even have several brand new tach boards for the standard 24 volt motors.
Parts galore for them if you know anyone looking. The price is right.
i KNOW THIS THREAD IS OLD, BUT DO YOU STILL HAVE PARTS AVAILABLE? i AM LOOKING FOR A DISPLAY BOARD.
Reply With Quote
