I picked up a broken pipe wrench today out of our scrap hopper. Looks to be about 14 inch cast aluminum.
Thought I would try and fix it, The last 4" of the handle is broken off and I have that part also.
My thought was to bevel both sides and go at it insuring a welded all the way through joint.
All I have is 4043 filler, even thought about putting a couple strips along the outside for some added strength.
How would you guys repair it?
Results 1 to 6 of 6
Thread: Monkey Wrench
02-06-2013, 12:17 AM #1