Im welding 2" sch 80, 6G Position
I seem to be having trouble keeping the key hole, not in the terms of loosing it but it gets away on me!!(too large)
I am using 1/8 6010 running about 85 amps with the arc force up too stiff on my
PIPE is set with 1/8 gap,1/16 root face, I have tried whipping and just shoving the rod in, It makes a perfect hollow pipe hiss but all of a sudden boom large key hole!
Going to try a feather edge and drop my amps too around 75,and set arc force to soft to see how that goes!!
Any and all suggestions/Tips will be appreciated,
Results 1 to 6 of 6
Thread: pipe welding help/suggestions
02-01-2013, 10:16 PM #1Senior Member
- Join Date
- Mar 2010
pipe welding help/suggestions