i currently have a syncrowave 200. Don't really know what happened just one day it wouldn't start the tig arc. It stick welds fine. Tried a new foot remote an still nothing... no arc or gas flow. Shops around are so dang expensive. Looking for a place to get a new board maybe? Any hints or thoughts appreciated!
Results 1 to 5 of 5
Thread: Syncrowave 200-no tig
-
01-31-2013, 07:31 PM #1
Junior Member
- Join Date
- Jan 2013
- Posts
- 2
Syncrowave 200-no tig
-
02-01-2013, 09:36 PM #2
Senior Member
- Join Date
- Aug 2006
- Location
- Raymore Missouri
- Posts
- 1,908
Bump
Nick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
2-O/A outfits
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
Propane Forge
60" X 60" router/plasma table
www.youtube.com/watch?v=jTu7wicVCmQ
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
-
02-02-2013, 11:06 AM #3
Member
- Join Date
- May 2003
- Posts
- 52
Can you post your machine settings while in tig mode please?
Did you try both AC and DC polarity in tig mode?
-
02-05-2013, 06:55 PM #4
Junior Member
- Join Date
- Jan 2013
- Posts
- 2
zachary
Yes i tried all polarities. still nothing
-
02-05-2013, 07:26 PM #5
Senior Member
- Join Date
- Oct 2004
- Location
- Edmonton, Alberta
- Posts
- 6,755
Serial#, and what does the machine do when you paper clip (jumper) "A" to "B" on the 14 pin machine amphenol,
Reply With Quote
