I bought a HF 20T press. My main use for it will be bending flatstock. My standard most common size will be 4x3/8" flatstock @ 90deg. I have attached a drawing of my plan. It is designed with what I have here in my shop.
Any ideas/modifications will be appreciated.Press brake.jpg
Results 1 to 10 of 24
Thread: Press brake - Opinions
Threaded View
-
01-23-2013, 01:37 PM #1
Member
- Join Date
- Feb 2012
- Posts
- 43
Press brake - Opinions
Last edited by aaronobrien; 01-23-2013 at 01:56 PM. Reason: ** added photo
Reply With Quote
