Anyone know where I can get a retrofit kit to run the Spoolmate 100 on a M180? The part number is 300409, but all my local distributors say "discontinued, sorry".
Thanks, Mike
Results 1 to 4 of 4
Hybrid View
-
01-22-2013, 02:02 PM #1
Junior Member
- Join Date
- Jan 2013
- Posts
- 2
Spoolgun retrofit kit for M180 - 300409
-
01-22-2013, 06:33 PM #2
Senior Member
- Join Date
- Sep 2005
- Location
- East Tennessee
- Posts
- 137
Professional Auto Mechanic since 1974
My own shop since 1981
Cya Frank
-
01-23-2013, 07:28 AM #3
Member
- Join Date
- Jul 2007
- Location
- south alabama
- Posts
- 35
might also try cyberweld.com
-
01-23-2013, 08:51 AM #4
Junior Member
- Join Date
- Jan 2013
- Posts
- 2
Thanks guys.....I did find 1 or 2 resources that "seem" to have them (the Amazon one is Weldfabulous...a few weeks for delivery, not stocked). Prices are silly for a switch, wiring, some pins, and a sticker ($55-69!). I've been trying to get the wiring diagram for this retro kit, but so far no luck (I asked Miller). If Miller has discontinued it, they should at least offer the diagram. I have a pretty good idea of what it is....it just diverts the power from the normal gun drive to pins 3&4 on the gun, which powers the spoolgun.
I'll keep you posted.
Mike
Reply With Quote
