My first time on here, glad to be here. I work in a "communal" shop and need some advice on how to clean the carbon build up out of a medium size Victor heating tip. The tip is 11 inch long over all and has 6 holes in the end (just for reference).
I believe, that people who come through the shop and use the tip when I am out are turning the oxygen off first and letting the acetylene burn back. I know that I always add a touch of oxy when I light the torch and turn down both gases before turning off the acetylene first. However, I am still seeing substantial carbon build up within the feeder tube of the tip. from one end to the other.
First question: Am I doing something wrong, or missing something?
Second question: Any good ideas of how to get the carbon out of the inside of a tip like this? I am unscrewing the tip head, and using bottle brushes, and pipe cleaners, and tip cleaners where ever they work and blowing the carbon out with compressed air. Any thoughts??
Results 1 to 1 of 1
Thread: Carbon build in heating tips!
01-22-2013, 11:11 AM #1Junior Member
- Join Date
- Jan 2013
Carbon build in heating tips!