Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2012
    Location
    Sweetwater, TX
    Posts
    201

    Question Which outlet for dynasty 200dx?

    Going to start rewiring the new building on the lot next door we purchased. It was previously used as a welding shop so the wiring should be ok. I just don't like the placement of some of the plugs.

    I'm moving an existing 240v oulet in my shop to a more central location not to mention the current outlet was in need of replacement. The building already has a 50amp breaker dedicated to the plug.

    What style plug does the dynasty 200dx us for 240v, straight or angled?

    Which one?
    http://www.lowes.com/pd_409855-43469...t_avg_rating|1

    Or
    http://www.lowes.com/pd_246883-1571-...t_avg_rating|1

    Does the dynasty come with a plug on it or bare wires?
    can some one post a picture of it?

    Have a gift card to lowes I can use to get the outlet as well as some outdoor rated covers for my 120v outlets to prevent spraying them when grinding.

    Thanks!

  2. #2
    Join Date
    Jul 2010
    Location
    Salem, NJ
    Posts
    271

    Default

    You just need a 30 amp outlet. I have mine off of a 50 amp straight bar as in your first one. I use that one because it is the most universal outlet that a homeowner has.

  3. #3
    Join Date
    Nov 2012
    Location
    Northern Arizona
    Posts
    475

    Default

    I've got all my equipment standardized with NEMA 6-50 ends. I have adapters built to allow me to plug my equipment into other types of receptacles when I'm not at the shop. IIRC, the dynasty will come with a bare pigtail and allow you to add your own plug.
    MillerMatic 251
    CST 280 w/tig torch
    HF-251-D1
    Cutmaster 42
    Victor Journeyman OA

    A rockcrawler, er money pit, in progress...

  4. #4
    Join Date
    Dec 2012
    Location
    Sweetwater, TX
    Posts
    201

    Default

    Quote Originally Posted by elvis View Post
    I've got all my equipment standardized with NEMA 6-50 ends. I have adapters built to allow me to plug my equipment into other types of receptacles when I'm not at the shop. IIRC, the dynasty will come with a bare pigtail and allow you to add your own plug.
    How many wires is the pigtail 3 or 4 ?

  5. #5
    Join Date
    Nov 2012
    Location
    Northern Arizona
    Posts
    475

    Default

    it will run on 3-phase so it should be 4-wire conductor. You can just pull off the extra (usually red) wire to run it on single phase. Depending on your situation you also might want to wire up a adapter to run it on 115v power. It will auto link for the right power source, which is handy.
    MillerMatic 251
    CST 280 w/tig torch
    HF-251-D1
    Cutmaster 42
    Victor Journeyman OA

    A rockcrawler, er money pit, in progress...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.