Just picked up a old hobart 364 1DSCN3728.jpgDSCN3729.jpgDSCN3730.jpgDSCN3731.jpg. Got a few questions. there is a plug in the center of the amperage dial. what is it for? He gave me a pedal with 2 sets of wires sticking out. no plug. where do I get a plug and which one does it plug into? thanks for any help you can give.
Results 1 to 8 of 8
Thread: hobart adi 364 1
Hybrid View
-
01-06-2013, 06:27 PM #1
Junior Member
- Join Date
- Oct 2012
- Posts
- 4
hobart adi 364 1
-
01-07-2013, 05:47 PM #2
Junior Member
- Join Date
- Oct 2012
- Posts
- 4
48 views and not one bite??
-
01-09-2013, 04:36 PM #3
Junior Member
- Join Date
- Oct 2012
- Posts
- 4
nobody has any info on this??
-
01-09-2013, 04:53 PM #4
Senior Member
- Join Date
- Oct 2004
- Location
- Edmonton, Alberta
- Posts
- 6,763
Sure, its not worth your time and energy, probably worth a case of beer at a salvage yard though. Or would make a fine boat anchor.
-
01-09-2013, 05:12 PM #5
Junior Member
- Join Date
- Jan 2011
- Posts
- 24
You might want to try google.
There seems to be a manual available here:
https://share.acrobat.com/adc/docume...3-ab72359e0c49
You cannot view it online, you have to download it to view.
-
01-18-2013, 05:51 PM #6
Junior Member
- Join Date
- Oct 2012
- Posts
- 4
Thanks davido30093. that helped. I am missing the hand amp control. I plan on using a foot pedal anyhow. got it wired and fired up. Stick welds nice and smooth. will try out the tig when I get a pedal wired up
Reply With Quote
