I purchased a Spectrum 375 Xtreme used from a friend of mine. The original ICE torch was run over, and my LWS said the XT30 was an upgraded replacement, and the it was very easy to install. So I opened up the machine tonight and swaped over the torches. It was super straight forward, and I can't find anything I would have missed. I have the unit plugged into 220, and I have 100PSI going to it. The power light comes on, but when I pull the trigger nothing happens. No smoke, no crazy noises. There's no damage to the unit that I can see. According to my friend he used it very little. I'm stumped. Is there anything I should look at? Anything to check? Thanks guys.
Results 1 to 2 of 2
-
03-13-2013, 10:34 PM #1
Junior Member
- Join Date
- Mar 2013
- Posts
- 1
Spectrum 375 Xtreme Issues/troubleshooting
-
03-17-2013, 09:28 PM #2
Junior Member
- Join Date
- Jul 2012
- Location
- Wichita, KS
- Posts
- 12
I would contact the Miller Customer Service folks and talk to them directly (920-734-9821). I've called them before and they are first-class, helpful folks.
Steve
Reply With Quote
