I have a syncrowave 180 sd, serial # leo50118. When I try to strike an ark it sounds as if it is very "straining" if you will then shuts down and sets a hlp 1 code. I have double checked all connections to the switch, even bypased the switch and problem still is there.
I called tech support and was told I have to start by replacing the board, no way to diagnose the problem just to change the board and see what happens. I feel there is a better way to diagnose this problem so I am here.
I was also told by an independent tech to just buy another machine. I apreciate any and all help I can get from you profesionals