I'm wanting to put a quick connection on my welder. Why because I'm always on the move. And its always in the way when it comes to storage. I like the ones found on thermalarcs or on the new multimatic 200. Any ideas. Advice. I'm eventually going to do it. But I am having trouble getting the female end with a sleeve to bolt on the front of my welder. If you know where I can locate one foward me the info.
Results 1 to 9 of 9
Hybrid View
-
01-02-2013, 12:50 PM #1
Senior Member
- Join Date
- Aug 2012
- Location
- Hermiston Oregon
- Posts
- 127
quick connect ground on a Miller 211 ideas?
.
Miller Bobcat 225NT onan
Millermatic 211
Spoolmate 100
(Retapped to fit regular mig tips)
Work better & less parts to stock.
Miller 130xp
T/A Dragster 85 (portability 11 pounds)
Oxygen/Acetylene torch set 50'
2. 4-1/2" grinders
1. 9" grinder
14" Makita chop saw
1/2" Aircat impact gun 900#
-
01-02-2013, 01:06 PM #2
Senior Member
- Join Date
- Jul 2010
- Location
- Salem, NJ
- Posts
- 263
I would just order a male and female dinse connector.
It wouldn't be bolted to the machine, but your ground cable will just be 12" long when disconnected. If you really wanted it machine mounted, you can buy the machine dinse connector from your local welding supplier. It is a specialty item that usually only repair shops order.
-
01-02-2013, 03:44 PM #3
Senior Member
- Join Date
- Jan 2012
- Location
- Metro Detroit, MI
- Posts
- 182
quick connect ground on a Miller 211 ideas?
Agree
Never Satisfied
Millermatic 211
Maxstar 150STL
Metabos
Kennedy Maintenance Pro Full
Makita Cordless 18v Li-Ion
Stihl TS 420
Timfrank88@live.com
-
01-02-2013, 04:40 PM #4
Senior Member
- Join Date
- Aug 2012
- Location
- Hermiston Oregon
- Posts
- 127
I did think of leaving a pigtail for the ground. But I think Itll look better if I had a dins type flush. But where would I get the housing? I've ask my local dealer. He couldn't help. Bull****. I think.
.
Miller Bobcat 225NT onan
Millermatic 211
Spoolmate 100
(Retapped to fit regular mig tips)
Work better & less parts to stock.
Miller 130xp
T/A Dragster 85 (portability 11 pounds)
Oxygen/Acetylene torch set 50'
2. 4-1/2" grinders
1. 9" grinder
14" Makita chop saw
1/2" Aircat impact gun 900#
-
01-02-2013, 06:21 PM #5
Senior Member
- Join Date
- Oct 2007
- Location
- Cave Creek Az
- Posts
- 803
Go look at the welders online on the miller site. Look up the part number for the one you like by finding it i the downloadable manual, then go to the Miller4less.com site and order it.
-
01-03-2013, 09:51 PM #6
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,641
Is this what you need?
Originally Posted by eecervantes83
http://www.arc-zone.com/index.php?ma...649ltel56jf6b5Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
01-03-2013, 11:37 PM #7
Member
- Join Date
- Dec 2012
- Location
- Memphis, TN 38133, USA, Earth, Milky Way
- Posts
- 53
Slightly off-topic, but not really...
Is there any power unit that has a receptacle for a spool gun ONLY, sized for a Spoolmate100? IOW: I want to buy a "replacement" receptacle withOUT a drive motor, but WITH gas feed O-rings, but I don't know what machine to look up a PN for, or if it even exists.
Walk softly & carry a BIG SIX ! ! !
MM211 + SM100
-
01-02-2013, 06:25 PM #8
Senior Member
- Join Date
- Aug 2012
- Location
- Hermiston Oregon
- Posts
- 127
Ok I'll give it a try
.
Miller Bobcat 225NT onan
Millermatic 211
Spoolmate 100
(Retapped to fit regular mig tips)
Work better & less parts to stock.
Miller 130xp
T/A Dragster 85 (portability 11 pounds)
Oxygen/Acetylene torch set 50'
2. 4-1/2" grinders
1. 9" grinder
14" Makita chop saw
1/2" Aircat impact gun 900#
-
01-05-2013, 06:11 PM #9
Senior Member
- Join Date
- Aug 2012
- Location
- Hermiston Oregon
- Posts
- 127
Looks right thanks Originally Posted by Broccoli1:299029
Is this what you need? Originally Posted by eecervantes83
http://www.arc-zone.com/index.php?ma...649ltel56jf6b5
I'll put in a order.
Miller Bobcat 225NT onan
Millermatic 211
Spoolmate 100
(Retapped to fit regular mig tips)
Work better & less parts to stock.
Miller 130xp
T/A Dragster 85 (portability 11 pounds)
Oxygen/Acetylene torch set 50'
2. 4-1/2" grinders
1. 9" grinder
14" Makita chop saw
1/2" Aircat impact gun 900#
Reply With Quote
