When i bought my xmt it came with a complete tig setup. Torch with gas valve, foot pedal and the cups you would ever need. My big concern is the lift arc tig, i have always used hi frequency start. Is there any tricks to use it? I will be using it to weld in my cage in my firebird. Worse case
I will borrow my buddies dynasty 200.
Kevin
Results 1 to 3 of 3
-
12-31-2012, 12:54 PM #1
Senior Member
- Join Date
- Apr 2009
- Location
- Oswego IL
- Posts
- 513
xmt 304 as tig welder questions..
XMT 304
Miller Spectrum 625
Miller 30a spool gun
S22a
Miller Legend 302
Lincoln LN25
Ford f450 Maintainer Srv Truck
-
12-31-2012, 01:06 PM #2
Senior Member
- Join Date
- Oct 2004
- Location
- Edmonton, Alberta
- Posts
- 6,763
Its pretty easy, just put the tungsten on the work surface (no worries on contamination as there is no amperage there. then slowly lift the torch up, and off you go. Can't get much more simple
-
12-31-2012, 04:49 PM #3
Senior Member
- Join Date
- Aug 2004
- Location
- Milan Michigan
- Posts
- 1,422
Yup, I also agree, no need for a dynasty if you have a XMT.
Reply With Quote
