My 330 A/BP (serial # HJ191607) is acting up on me. No matter what setting I put it on; it runs at max amps no matter what position the Rheostat is in. I tested the rheostat and it does not fluctuate ohms of resistance when I move it. I'm 99.9% sure that is my problem, but wanted to see if there was anything else I should check before I spend the money. BTW, I found the Rheostat at a really good price ($53 to my door) here and it is the same miller part number: https://weldingsupply.com/cgi-bin/remember.pl
Thanks!
Results 1 to 4 of 4
Thread: 330 A/BP running wide open
Hybrid View
-
12-20-2012, 11:38 AM #1
Member
- Join Date
- Dec 2011
- Location
- TN
- Posts
- 79
330 A/BP running wide open
-
12-20-2012, 05:52 PM #2
Senior Member
- Join Date
- Oct 2004
- Location
- Edmonton, Alberta
- Posts
- 6,765
Send an email to ventureline@shaw.ca, and I'll send you the service manual for your machine. That'll make it easier than trying to explain it here.
-
12-20-2012, 06:11 PM #3
Member
- Join Date
- Dec 2011
- Location
- TN
- Posts
- 79
Awesome! Email sent. Thanks!
-
01-21-2013, 06:17 PM #4
Member
- Join Date
- Dec 2011
- Location
- TN
- Posts
- 79
Thanks again
Cruizer, Just wanted to say thanks again. If you are ever in Nashville; look me up and I'll buy you a few beers!
Reply With Quote
