I'm looking for any information for wiring a Miller Spectrum Lynx plasma directly to power without the needed generator...any help is appreciated...thx in Advance.
Results 1 to 4 of 4
11-28-2012, 03:09 PM #1Junior Member
- Join Date
- Nov 2012
Spectrum Lynx Plasma without generator
11-28-2012, 03:51 PM #2
You have a cabel on the back of the Lynx A, B, and D are the 220 volt AC power going in. A and B are hot and D in ground. Pins C and G are the 12 volt DC control. G is possative C is Neggative. If you would like me to e-mailyou a schematic send me an e-mail firstname.lastname@example.org
11-28-2012, 09:26 PM #3
Sorta kinda though you'll still need the 12Vdc, to make it go.
11-29-2012, 06:07 AM #4
Miller has the best staff ever when it comes to their plasma cutters.
Thanks Miller for all your help with my Spectrum 375.
Working great and with the stickers it will look like new very soon.
JiGrip it and Rip it