Mm200

[cope]

I really appreciate it! Il call them today or tomorrow. Im going in to work tonight so il take a look at it then, we build chrome plating racks and from looking at the part online i think i could easily fix or make replacement parts for it. The hardest part to find is the knob for the front, when i call miller il ask if they have any or any idea where to get one. Then il get a 220 v wired to the garage (anyone have estimate of cost..?) and pick up a tank of 75/25 and test this baby out . Not bad for a first mig.. especially for free.

I looked at the online parts list, and the PN wasn't listed for the MM200 gun. The M-25 for my MM210 is PN 169596

[ZJones1994]

Alright man, Il call today if i have time. I gotta run to work and if their open at 6 il be calling them.

[oldmachinenut]

I have a 15 ' M-25 on my MM200, it works great.

[big mike]

When you buy a Mig gun, it comes complete with a liner. It may or may not come with consumables. Before buying a gun, find out what brands have easily available consumables.

Contact Miller and see if a M-25 from a MM210 will fit. I have a 12' that is lightly used. I'll send it to you if you pay USPS shipping.

It will fit.

You are a nice guy Cope

[cope]

It will fit.

You are a nice guy Cope

ZJones1994, PM me your address, and I'll send the gun to you. Don't worry about the S&H, use the money towards a plug.

[cope]

It will fit.

You are a nice guy Cope

Mike, before I got my MM210, I had a PowCon SM200 with a 10' Tweco gun. A member at Hobart Weld Talk sent me a NIB 12' Bernard or Tregaskiss gun and consumables free. I am just paying it forward.

[ZJones1994]

So yet another stupid question.. where might i find the replacement plug for it and whats the actual name of it?

[cope]

So yet another stupid question.. where might i find the replacement plug for it and whats the actual name of it?

This is the plug for the power cord. Mind has gone blank, and can't remember the NEMA number.

http://www.amazon.com/Hobart-770024-..._bxgy_hi_img_y

This is the matching wall receptacle.

http://www.amazon.com/Leviton-5378-R...ref=pd_cp_hi_1

[ZJones1994]

Idk why that wasnt obvious to me before.. thanks. Heres a pic of it

[walker]

Looks like it has got the voltage selector knob on it already. If it is not changing then it likely has a broken roll pin (easy fix) or then nut has come off the back side (easy too). Pull the cover and see what is happening when you turn the knob.