I used a snap on 110v mig welder the other day and i gotta say it blew my millermatic 180 out of the water. I used to think snap on just picked the cheapest welder they could find and slap their name on it... but thats not the case at all. It had a 100% duty cycle at max amperage and welded really nice for a 110v welder. Plus it was pretty cool that the feeder was detachable.
Results 1 to 10 of 42
11-20-2012, 05:45 PM #1
why even build a 20% duty cycle machine?!
11-20-2012, 06:28 PM #2
100% Duty Cycle @ what amperage ?
I've never seen any mig welder with 100% duty cycle !
Sunrise Outside My Shop In Delhi, Ontario
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Lincoln Power Mig 180C
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
11-20-2012, 06:39 PM #3
What?... dude u have never seen a mig welder then. U look at the bigger industrial machines and they definetly have 100%. And yes the little 140 or 150 amp snap on is 100% at max amps. That is usually not the case with the smaller machines so thats pretty much the reason of starting this thread
11-20-2012, 06:41 PM #4
Delta weld 652 for example
11-20-2012, 06:48 PM #5
And not only that but the snap on came with an actual ground clamp.... not a piece of tin made to look like a ground clamp.
11-20-2012, 07:19 PM #6
Post up a link to the specs on this wonderful machineat home:
2012 325 Trailblazer EFI with Excel power
2007 302 Trailblazer with the Robin FOR SALE
2008 Suitcase 12RC
2009 Dynasty 200DX
2000 XMT 304
2008 Thermal Dynamics Cutmaster 52
Retired:Shopmaster 300 with a HF-251
11-20-2012, 07:28 PM #7Originally Posted by c wagner:296562
11-20-2012, 07:38 PM #8Senior Member
- Join Date
- Feb 2006
- Northern CA, Shasta CO.
With the price tag they've got they should be 100% duty cycle and come with an operator.
11-20-2012, 07:39 PM #9
11-20-2012, 07:40 PM #10Originally Posted by weldonwelding:296564