Ok guys I'm building a welding trailer from scratch to take to the Ag Mechanics shows at the San Angelo, San Antonio, and Houston livestock shows. I'm here to ask those of you who use your portable rigs(be it truck beds or trailors) what are your favorite features or what is something you wish you had on your rig?
I have already built the frame using 2"x4"x3/16" tubing for the frame rails and used the same 2x4 and 2x2x11ga tubing for crossmembers alternating back and forth every 2 feet. It is 16'x6'4" in size. I plan on having a 3/8'' table that comes up from the floor on a hydraulic. There will be an overhead rack for material and a sheet goods rack on the side. the tool boxes will be custom built to hang out over the tires on each side and have the fenders molded into them and they will have electric trunk latches that will be controled from one box. I have a Bobcat 225 that will go on it and I've incorperated an external Fuel cell that fits under the floor between the frame rails that will hold about 20 gallons of extra fuel. there will ofcourse be an Oxy/Accetyllene set up and all the reels for the welder and torches will be concealed in one tool box. I have plans to incorperate a small Jib crane onto it that will have have maybe an 8 foot reach so that i could pick up something on the opposite side of the trailer, but that is by no means final. I am going to put a detchable vice that will store away and want a source of compressed air for air tools, what do you suggest?
So what am I missing?
Results 1 to 1 of 1
11-17-2012, 09:55 PM #1Senior Member
- Join Date
- Jan 2008
- haslet, TEXAS
Welding Trailor Project Ideas for Junior Ag Mechanis showMiller Digital Elite inferno
Miller MP-10 passive helmet
Hobart Stickmate 250/160 ac/dc