Does anyone do this on a regular basis?
I have no option to plug into power, due to the fact project is at least 9kms from the closest power line...
Will a newer 302 run a dynasty 300dx tig on AC 250amp/????
Results 1 to 3 of 3
11-16-2012, 10:39 PM #1Junior Member
- Join Date
- Dec 2005
- BC Canada
Trailblaser 302 running a dynasty 300MM 130 110v Mig
Spectrum Cutmate 300 110v/240v Plasma
Syncrowave 250 Tig, oldie but welds nice
Dynasty 300 DX Tig, very nice machine, AC doesn't start most of the time
11-17-2012, 11:05 AM #2
Looks like the 300dx is rated at 61amps Input for 250amps welding output.
TB302 only has 11,000watts of continuous power
11,000/240v = 45amps.
Passport Plus w/Spool Gun
Miller 125c Plasma 120v
SO 2020 Bender
You can call me Bacchus
11-17-2012, 11:40 AM #3
It's pretty dirty power to run such a expensive machine on, though I suppose it would work, The internal inverter system should handle it. Why do you need to run it in the field anyways. Not difficult to tig off your TB even in AC with a hf box.