i bought a used machine last week, a 2005 model that is supposedly unused, and looks to be, other than the torch, it was bought by a body building company who ran 440 and big goofy round blue 4 prong plugs, apparently they had put that plug on this machine, and plugged it into a 440 power supply and it never worked from there on out and has sat since, that is pretty much all i know about the unit,
when i got it it had no plug, i put a 50 amp plug on it, and nothing, no lights, the red light on the board doesnt light up either pulled the cover and nothing smells or appears to be fried, blackened etc, inside this thing is as new as it gets, the capacitor looks a little goofy in that the black coating is cracked in one spot the size of a thumb nail and almost looks like it has corrosion under it, like aluminum corrosion, although i see no corrosion, this is my first plasma and although im pretty handy and can fix most anything, im a little stumped. are there any fuses on this unit im not seeing? any help would be great...
Results 1 to 7 of 7
Thread: Spectrum 625 not powering up
11-07-2012, 05:36 PM #1Junior Member
- Join Date
- Nov 2012
Spectrum 625 not powering up