I have a Millermatic 200 sn KA864536 and am trying to determine the proper location of the input jumper for 230V. The manual references a decal that should be on the board where the jumper is, but it is gone. Anybody have a machine with the decal or know the proper location for the jumper? Thanks.
Results 1 to 5 of 5
Hybrid View
-
11-04-2012, 01:06 PM #1
Junior Member
- Join Date
- Nov 2012
- Posts
- 3
Millermatic 200 Input Voltage Selection
-
11-04-2012, 05:25 PM #2
Senior Member
- Join Date
- Oct 2007
- Location
- Cave Creek Az
- Posts
- 803
Should be able to find it on the search function, otherwise just download the manual from the resources tab on this site.
-
11-06-2012, 12:37 AM #3
Junior Member
- Join Date
- Nov 2012
- Posts
- 3
I have downloaded the manual and as I said it references a decal that should be on the board, but is not. The schematics in the manual are not much help because the wires are not marked. I've searched the forums and not found anything relevant.
Originally Posted by walker
-
11-06-2012, 06:17 AM #4
Senior Member
- Join Date
- Oct 2007
- Location
- Cave Creek Az
- Posts
- 803
Here is a thread that references it. http://www.millerwelds.com/resources...t-Voltage-Taps
-
11-06-2012, 01:04 PM #5
Junior Member
- Join Date
- Nov 2012
- Posts
- 3
Thank you! I'm not sure why I didn't find that one. Originally Posted by walker
Reply With Quote
