Hi guys, I have a Dialarc and I`m thinking to buy a HF arc starter 251. I want to know if I can attach a foot control to the HF arc starter without use the 14 pin connector that goes from the welder to the HF.
Results 1 to 2 of 2
Thread: Hf Miller 251
11-02-2012, 06:38 AM #1Junior Member
- Join Date
- May 2008
Hf Miller 251
11-02-2012, 10:06 AM #2
If you have a dialarc DC only machine, seems kinda pointless to use an arc starter, most scratch off a piece of scrap to the work surface.