I picked up a 3 turn weld remote for my Trailblazer 301G on Friday and finally had a chance to hook it up and try it just a few moments ago. I hooked the cable into the machine remote receptacle and flipped the switch from panel to remote, went inside and hooked the cable to the remote box. Threw a 1/8 7018 into the stinger and tried welding. There was hardly an arc no matter how hot I put the remote setting. I plugged a grinder into it and nothing. Walked over to the machine and it worked so I know it's not the plug.. Anything I am missing?
Thanks for the help.
Results 1 to 3 of 3
Thread: miller remote issue
Hybrid View
-
10-28-2012, 01:24 PM #1
Member
- Join Date
- Nov 2011
- Location
- Edmonton
- Posts
- 35
miller remote issue
-
10-28-2012, 04:40 PM #2
Senior Member
- Join Date
- Oct 2004
- Location
- Edmonton, Alberta
- Posts
- 6,753
Well you don't whine about it here, you look at he faceplate, and call me in the morning.
-
10-28-2012, 08:22 PM #3
Member
- Join Date
- Nov 2011
- Location
- Edmonton
- Posts
- 35
Easy... Just thought I might have missed something, before calling you looking like an ideot. Thanks cruizer, appreciate it.
Reply With Quote
