Hey guys,
I'm brand new to the site but just bought a brand new machine, 350p that's giving me code seven for input power problems.
I've had the covers off and first thing changed setting to 230V . Tried machine on several different plugs in shop and even bright machine home and tried it here. Still no go. Checked voltage with Fluke MM and all plugs are in the 237-245 range. Any suggestions guys?
Results 1 to 5 of 5
-
10-25-2012, 10:36 PM #1
Junior Member
- Join Date
- Oct 2012
- Posts
- 4
Brand new 350p out of the box throwing code 7
-
10-26-2012, 09:29 AM #2
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,641
Is the Power cord Plug wired correctly?
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
10-26-2012, 10:17 AM #3
Senior Member
- Join Date
- Oct 2004
- Location
- Edmonton, Alberta
- Posts
- 6,763
Serial # please
-
01-05-2013, 11:44 PM #4
Junior Member
- Join Date
- Oct 2012
- Posts
- 4
Sorry guys that it took so long to respond to this post. With the help of a factory tech on the phone that was very sharp in the out of box thinking area I was able to troubleshoot what was going on with this machine. My LWS had already ordered a replacement machine and I can't speak highly enough about them. Internally there was a volt sense wire that was insulated the wrong color and therefore installed in the wrong position on the relay. Got the new machine wired up and have been welding away.
-
01-05-2013, 11:45 PM #5
Junior Member
- Join Date
- Oct 2012
- Posts
- 4
Sorry guys that it took so long to respond to this post. With the help of a factory tech on the phone that was very sharp in the out of box thinking area I was able to troubleshoot what was going on with this machine. My LWS had already ordered a replacement machine and I can't speak highly enough about them. Internally there was a volt sense wire that was insulated the wrong color and therefore installed in the wrong position on the relay. Got the new machine wired up and have been welding away.
Reply With Quote
