I pulled the distributor it out of my 1970 Miller big 40 with a Continental F 163 motor in it. I installed the new distributor , but now when cranking over the motor the rotor isn't spinning. It spins for a slight second then stops or if I pulled the distributor out slightly it will spin properly. Then when I tighten the distributor down again the rotor stop spinning again. Not sure what the problem is if you have any information I'd appreciate the help thanks
Results 1 to 10 of 14
10-14-2012, 10:23 PM #1Junior Member
- Join Date
- Sep 2012
problem with distributor on 1970 Miller big 40 please help.