Is there one specifically with the air-pak cut out?
Results 11 to 14 of 14
Thread: Trailblazer Cover Needed?
10-09-2012, 11:38 PM #11Lincoln Vantage 400
Trailblazer® 302 Air Pak™
Miller Dynasty® 350
Millermatic 350P Aluminum
Lincoln LN-25 Pro
XR-Aluma Pro Gun
Spectrum® 625 X-TREME™
Thermal Dynamics® Cutmaster® 52
Victor Oxy/Acetylene Set
10-10-2012, 03:05 AM #12Junior Member
- Join Date
- Jun 2012
- McHenry, Il
Can not run this horse with any cover
Is there one specifically with the air-pak cut out?[/QUOTE]
When not in use and cool, cover it.
Miller sells a cover for $140.
10-10-2012, 10:52 AM #13
There is just not enough airpacks around to justify making a cover for one, as for Miller covers, giver. You have to remove it when the machine is in use, and its not insulated. At -30 thats all I want to do is get up on my rig and remove the snow, remove the now hard Miller cover, then hope to heck that it starts. End of shft, brush the snow snd moisture off the machine, and close it up with that cover. And hope that it doesn't freeze to the machine for the next day.
With a 50 wt pan heater under the engine (on a TB, and other) plus an insulated cover, that engine and generator is warm. Open the front flap and start it up. Weld away, end of shift, close the front flap, go home.
Last edited by cruizer; 10-10-2012 at 10:55 AM.
10-12-2012, 07:38 PM #14Senior Member
- Join Date
- Feb 2007
- asheville n.c.
love to run one about 27-28 volts all day