Just bought the Dynasty 350 last week and have a couple questions for the aluminum guys........I have been Tig welding for 30 + years but the Inverter is a SPACE SHIP
to figure out for me...lol I use my Lincoln Tig 355 everyday for 8 hours welding my customers handicap lifts
and it does a great job, but like a lot of other older guys I kinda wanted a Dynasty because of the things I have heard
and so far their right. Nice machines....BUT the transition is kicking my rear.....When you change the BAL
the EP $ EN changes so is that all I need to do is select
my BAL and the EP & EN will be correct? I haven't UN-LOCKED anything so the machine is just the way it came out of the box......Thanks Guys Glad to be here
Results 1 to 10 of 17
Hybrid View
-
10-04-2012, 05:02 PM #1
Junior Member
- Join Date
- Oct 2012
- Location
- Nor Cal
- Posts
- 14
New member here but older that dirt.....Question about new Dynasty 350
My wife says I'm 65 going on 12.....I wonder why she says that?
-
10-04-2012, 05:30 PM #2
Senior Member
- Join Date
- Feb 2012
- Posts
- 561
New member here but older that dirt.....Question about new Dynasty 350
Two different adjustments. 1. ac balance changes % of time per cycle on Positive compared to negative. 2. Adjusts the amperage of Positive and amperage all negative
-
10-04-2012, 08:45 PM #3
Junior Member
- Join Date
- Oct 2012
- Location
- Nor Cal
- Posts
- 14
Setting EP & EN
So how do you know how much EN and EP to add to a weld amp....
Or does setting the weld Amp set the EP and EN for you and you can tweak that value?
Last edited by B_C; 10-04-2012 at 08:47 PM.
My wife says I'm 65 going on 12.....I wonder why she says that?
-
10-04-2012, 09:00 PM #4
Senior Member
- Join Date
- Feb 2012
- Posts
- 561
New member here but older that dirt.....Question about new Dynasty 350
Set EP with the amps you want then EN with the amps you want. When you hit the A button it will show the average amps set.
-
10-05-2012, 09:03 AM #5
Senior Member
- Join Date
- Feb 2009
- Location
- Lodi, CA
- Posts
- 1,132
B_C,
Did you read the "sticky" thread AskAndy started?
http://www.millerwelds.com/resources...ocesses-Set-UpObviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....
-
10-05-2012, 11:44 AM #6
Junior Member
- Join Date
- Oct 2012
- Location
- Nor Cal
- Posts
- 14
No I just joined and not familiar with the forum yet....
My wife says I'm 65 going on 12.....I wonder why she says that?
-
10-05-2012, 04:43 PM #7
Senior Member
- Join Date
- Feb 2009
- Location
- Lodi, CA
- Posts
- 1,132
Click on the link I gave you, I don't know if the answer is there, but I'd bet reading the whole thread, you would probably find answers to questions you haven't even thought of yet.
Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....
-
10-05-2012, 04:45 PM #8
Senior Member
- Join Date
- Feb 2009
- Location
- Lodi, CA
- Posts
- 1,132
How have you been, BTW??? I kind of miss you, since you no longer post on Hobart.
Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....
-
10-05-2012, 05:09 PM #9
Senior Member
- Join Date
- Feb 2012
- Posts
- 561
I'll bet if you read the whole thread you have more free time than I do.
Originally Posted by JSFAB
Click on the link I gave you, I don't know if the answer is there, but I'd bet reading the whole thread, you would probably find answers to questions you haven't even thought of yet.
Why doesn't miller weed out all the bs on that thread.
-
10-05-2012, 07:42 PM #10
Junior Member
- Join Date
- Oct 2012
- Location
- Nor Cal
- Posts
- 14
I have been really good a few health issues but nothing serious, just old guy crap. I have been so busy with this Handicap Lift company Im welding parts for I haven't had too much time to hang out anywhere. I found this site last week and needed some help with the New Dynasty 350...
I post some on Weld Web....There are some great guys on there also. This Dynasty is really fun for me since I weld Aluminum almost exclusively. There has been so much money in this deal I stopped taking in work and weld 8 hours a day on the lifts...... http://www.lifeguardlift.com/
My wife says I'm 65 going on 12.....I wonder why she says that?
Reply With Quote
