Well i finally took the plunge and spent the $275 on a M-25.I had been wishin for long time the gun was longer but was being tight with money.After 14yrs of a 10' gun i must say i,m lovin this 15 footer.Makes things alot easier to weld in the shop.Anyone else hating there 10 foot gun its worth the investment.
Results 1 to 3 of 3
Thread: new gun on my mm 250x
-
10-29-2012, 05:23 PM #1
Senior Member
- Join Date
- Apr 2006
- Location
- TAXACHUSSETTS
- Posts
- 1,412
new gun on my mm 250x
Last edited by admweld; 10-30-2012 at 02:35 AM.
BB402D
TB300D
DIMENSION652
MM250X
MAXSTAR140
S-32 FEEDER W/1260 IRONMATE FC/GUN
HT/PWR-MAX1250 PLASMA
-
10-29-2012, 06:45 PM #2
Senior Member
- Join Date
- Oct 2004
- Location
- Edmonton, Alberta
- Posts
- 6,750
Yeah, a longer gun is ok, but pretty tough on your drive system. A twist or 2 on your cable will make the drive slip. Often its best to also go with a single knurled drive roll to compensate and then loosen off the drive so that it's not working as hard.
-
10-29-2012, 06:51 PM #3
Member
- Join Date
- Mar 2006
- Location
- northwest Pa
- Posts
- 76
new gun on my mm 250x
Bernard makes a nice 15 foot gun for Miller. I bought a couple on eBay for under $150 ea.
Reply With Quote
