Hi guys this is my first post. Sorry if there are typos I'm doing this from my phone. Ok I've got a old miller starfire 2e. Well as most of you guys may no those old tecumseh OH-120's are kinda hard to come by. Well my dad gave me this welder, he used it for years. Well my problem is either the coil, stator, or some other electrical problem is causing me to get no spark. My question is are there any modern engines that will bolt up to the generator/welder and run at the proper rpms needed to weld. If I can ill run out to the shed and get the exact model number off the engine. Thanks guys

Steve

Ok I got the engine model # OH120 175028D and serial # 7321E.

Thanks again guys