Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 12

Hybrid View

  1. #1

    Default cutting expanded?

    What is the fastest and easiest way to cut expanded steel?Thanks.
    Last edited by stickwelds; 07-08-2006 at 04:54 PM.

  2. #2
    Join Date
    Sep 2005
    Posts
    100

    Default

    The fastest and easiest is a shear.
    Since I don't own one, I use my plasma with a straight edge guide.

  3. #3
    Join Date
    Sep 2002
    Location
    Clark County, NV
    Posts
    2,696

    Default

    Ditto. I'm so po', I didn't even think of the shear. I use plasma. This is where you need a GOOD, modern plasma, though, because the old-style and even the new cheap ones don't have the automatically relighting pilot arc.

  4. #4
    Join Date
    Jun 2006
    Location
    Ontario, Canada
    Posts
    9

    Default

    And if you're even poorer you can use an angle grinder

  5. #5
    Join Date
    Sep 2002
    Location
    Clark County, NV
    Posts
    2,696

    Default

    I've used a sawzall with decent results, too. You don't even need the straightedge because the expanded diamonds will recenter the blade for you for each little cut.

  6. #6
    Join Date
    Dec 2005
    Location
    Pennsylvania, USA
    Posts
    20

    Default

    Circular saw with abrasive wheel has worked for me...
    Syncrowave 250DX
    Millermatic 250X
    Hypertherm PowerMax 1100

  7. #7

    Default

    Hey richcharles what rod size should I use?I have some 60/11 they are 3/32 and 1/8.
    Stickwelds

    millermatic 251
    thunderbolt xl
    hypertherm powermax 380
    jet bandsaw
    delta chopsaw

  8. #8
    Join Date
    Jan 2006
    Location
    Antigonish, Nova Scotia, Canada
    Posts
    33

    Default

    Go with the 1/8 rod at 90-100 amps.
    Hope that helps

    Charles

  9. #9
    Join Date
    Oct 2005
    Location
    Calgary, AB
    Posts
    52

    Default

    14" gas powered cut-off saw. Keep a steady hand.
    Just kidding. I usually go the skill saw with abrasive disc route.
    The difference between No One. and No. One is where you put the period. John Force

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.