Syncrowave 250 S/N KE731139
I have owned this unit for a few years and I have just set it up for TIG welding. The unit was used when I purchased it. Up til now everything had been working fine. I have gas flow to the gas flow solenoid but can't get anything out. I opened the solenoid to see if mud-daubers had made a home in it. It was clear. Is there a way to check the solenoid operation without removing it? Am I missing something on the setup? I get an arc but no gas flow.
Thanks for any help anyone can give.
Results 1 to 3 of 3
09-19-2012, 05:49 PM #1Junior Member
- Join Date
- Sep 2012
Syncrowave 250 TIG setup. No gas flow.