Is there a procedure for welding these and maintaining their maximum strength?
http://www.awdirect.com/weld-on-grab...8wgh/hardware/
I'm planning on using my tig to weld them.
Thanks
RSN
Results 1 to 10 of 15
Thread: Weld on hooks
-
09-13-2012, 02:19 PM #1
Junior Member
- Join Date
- Mar 2012
- Posts
- 6
Weld on hooks
-
09-13-2012, 02:47 PM #2
Senior Member
- Join Date
- Aug 2010
- Location
- Los Angeles
- Posts
- 1,106
They are designed and marketed as weld on hooks. I think I would be more worried about the welds breaking. The tech sheet states just that.
Originally Posted by Grinsha
Nothing welded, Nothing gained
Miller Dynasty700DX
3 ea. Miller Dynasty350DX
Miller Dynasty200DX
ThermalArc 400 GTSW
MillerMatic350P
MillerMatic200 with spoolgun
MKCobraMig260
Lincoln SP-170T
Linde UCC305 (sold 2011)
Hypertherm 1250
Hypertherm 800
PlasmaCam CNC cutter
Fadal Toolroom CNC Mill
SiberHegner CNC Mill
2 ea. Bridgeport
LeBlond 15" Lathe
Haberle 18" Cold Saw
Doringer 14" Cold Saw
6 foot x 12 foot Mojave granite
-
09-13-2012, 02:53 PM #3
Senior Member
- Join Date
- Sep 2012
- Location
- seaford de
- Posts
- 366
I use these all the time and i weld with 3/32 7018. I leave a 1/8 gap for full penetration.
-
09-13-2012, 04:10 PM #4
Senior Member
- Join Date
- Aug 2006
- Location
- Raymore Missouri
- Posts
- 1,910
What gap for JB Weld? :-/
Nick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
2-O/A outfits
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
Propane Forge
60" X 60" router/plasma table
www.youtube.com/watch?v=jTu7wicVCmQ
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
-
09-13-2012, 04:20 PM #5
Senior Member
- Join Date
- Sep 2005
- Location
- 16919 Pole Rd. Brethren, MI 49619
- Posts
- 4,248
I wire weld or 7018.
-
09-13-2012, 04:53 PM #6
Junior Member
- Join Date
- Mar 2012
- Posts
- 6
I just went ahead and tig'ed em on.
hook.jpg
-
09-13-2012, 05:24 PM #7
Senior Member
- Join Date
- Sep 2012
- Location
- seaford de
- Posts
- 366
monty55
U mean to tell me you dont know?... i figured hangin out in the hobby shop every weekend u would know
-
09-13-2012, 05:36 PM #8
Senior Member
- Join Date
- Sep 2012
- Location
- seaford de
- Posts
- 366
That doesnt look bad.. try wrapping your corners. That will make for a whole lot stronger weld Originally Posted by Grinsha:293109
-
09-13-2012, 05:45 PM #9
Senior Member
- Join Date
- Aug 2006
- Location
- Raymore Missouri
- Posts
- 1,910
I'm no expert with JB Weld. I am not sure whether to push or pull the bead
Nick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
2-O/A outfits
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
Propane Forge
60" X 60" router/plasma table
www.youtube.com/watch?v=jTu7wicVCmQ
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
-
09-13-2012, 05:49 PM #10
Senior Member
- Join Date
- Sep 2012
- Location
- seaford de
- Posts
- 366
What is jb weld? Originally Posted by monte55:293115
I'm no expert with JB Weld. I am not sure whether to push or pull the bead
Reply With Quote
