Two stroke dirt bike exhaust pipes are constantly getting dented. They are usually paper thin so just about any kind of rock, log or knee will dent them.
There are a few methods on removing the dents of which I have tried a few over the years.
This project is the pressure and heat system.
The ali members cost $12.00 including cutting.
Then it was just drilling, tapping and Tigging.
First stage complete I am off to get the hardware required.
Ji
Results 1 to 7 of 7
-
09-20-2012, 09:25 PM #1
Senior Member
- Join Date
- Jul 2009
- Location
- Australia
- Posts
- 980
Dirt Bike Exhaust Pipe Dent Remover
Grip it and Rip it
-
09-21-2012, 08:42 AM #2
Senior Member
- Join Date
- Feb 2012
- Location
- Wa
- Posts
- 321
How does it work?
-
09-21-2012, 10:44 AM #3
Member
- Join Date
- Nov 2008
- Location
- Clovis, New Mexcio
- Posts
- 31
Dirt Bike Exhaust Pipe Dent Remover
Looks nice
-
09-22-2012, 02:04 AM #4
Senior Member
- Join Date
- Jul 2009
- Location
- Australia
- Posts
- 980
Thanks for the kind words SSPracing
JiGrip it and Rip it
-
09-22-2012, 02:06 AM #5
Senior Member
- Join Date
- Jul 2009
- Location
- Australia
- Posts
- 980
Picked up the hardware and assembled.
Looks pretty good.
Do a pressure test tomorrow.
JiGrip it and Rip it
-
09-23-2012, 10:12 AM #6
Junior Member
- Join Date
- Mar 2012
- Location
- Central Ca.
- Posts
- 5
NICE!! Keep Us posted.
Originally Posted by Jigantor
-
09-23-2012, 04:43 PM #7
Senior Member
- Join Date
- Jul 2009
- Location
- Australia
- Posts
- 980
Hi GeeMfg,
Thanks for the kind words.
As I do testing I will post.
JiGrip it and Rip it
Reply With Quote
