Start out with some 3/4 round rod cut about 3' pieces, then make a template from plate thats at least as thick as the rod. Tack the plate to work table. Tack one end of the rod to the template as shown. Heat and bend. Leave enough gap or bevel for 100% penetration. Weld with 7018 or mig
Results 1 to 10 of 16
Thread: build heavy chain
09-11-2012, 10:37 PM #1
build heavy chain
Last edited by weldonwelding; 09-12-2012 at 07:12 PM.