recent job

[admweld]

Few pics of railing just did.

[drpipe]

Hmm is that just 1 1/2? Pipes cut at random lengths and shoved into wooden posts then painted with a rattle can?

[Doughboyracer]

Hmm is that just 1 1/2? Pipes cut at random lengths and shoved into wooden posts then painted with a rattle can?

If you looked closer you would notice brackets ON the posts...but I'm sure his welds are not near as good as yours 24k...shame your eyes aren't near as good though.

[admweld]

The brackets are anchored with lag screws into the post.

[walker]

Oh, you used lags. Next time try a birch dowel at about 75 amps, to stick weld them on. If you get the foil covered dowels from the craft store you can do aluminum to wood as well
Looks good.

[Cornerstone]

Oh, you used lags. Next time try a birch dowel at about 75 amps, to stick weld them on. If you get the foil covered dowels from the craft store you can do aluminum to wood as well
Looks good.

Yes but,what keeps the wood from burning?

[admweld]

Oh, you used lags. Next time try a birch dowel at about 75 amps, to stick weld them on. If you get the foil covered dowels from the craft store you can do aluminum to wood as well
Looks good.

I,ll stick with lag screws thanks.

[drpipe]

Lmfao ........ Did ya stove pipe it

[BD1]

Lmfao ........ Did ya stove pipe it

What are you looking at ?? Focus, focus. The brackets are fastened with lag
screws to the post. Pipe railing is welded to the bracket. Hard to see to a untrained eye. Pipe and brackets are black and post are white.

[drpipe]

Bd1 I use my iPhone to play on the net at work when I'm not making flawless welds I come here or surf **** sites ....... Pardon me to the welder I was looking at very small pics ...... Bitty1 your not going to get me going cause your not worthy to carry my rod bucket