Ive been slowly working on these ramps for my car trailer, getting tired of lugging around the heavy steel ramp I have. I should be testing them out this weekend, just have to finish the mount on the trailer. I used a mix of mig and tig, they are made out of 6061 2.5" sqaure tubing 1/8" thick. Not sure of their max capacity but they should work fine for my mustang and most cars. I would have rather of used 1/4" thick tubing but this is what I had available at the time.
Attachment 29559Attachment 29560Attachment 29561Attachment 29562Attachment 29563IMG_6668.JPGIMG_6669.JPGIMG_6670.JPG
Results 1 to 2 of 2
Thread: Aluminum Ramps (car trailer)
04-29-2012, 08:46 AM #1Junior Member
- Join Date
- Aug 2010
- Rhode Island
Aluminum Ramps (car trailer)
04-29-2012, 08:58 AM #2
Looks like those will work good...BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.