Setting up my place

[GilNewWelder]

I'm setting a place (about 20ft x 30ft). I'm gonna have two tables, one movable and the other fixed, also have plans for a portable work station I found (was made from wood over a steel frame).

Movable table (1/2" top 24" by 48")



Fixed table (1/4" top 29" by 50")


Work Station (29" by 25")



Maybe will do smething like this:

[aametalmaster]

What kind of fabbing will you be doing?...Bob

[GilNewWelder]

What kind of fabbing will you be doing?...Bob

Will start with 4-5 of this:

Or this one

[aametalmaster]

Will start with 4-5 of this:

Or this one

Cool. Need some of these???...Bob

[MMW]

In the picture labled fixed table I see a huge fire hazard. Lots of stuff on the shelves that are most likely flammable. Make sure you know where your sparks from grinding, cutting, etc. are going. Get a few extinguishers.

Good luck with the first "job".

[GilNewWelder]

In the picture labled fixed table I see a huge fire hazard. Lots of stuff on the shelves that are most likely flammable. Make sure you know where your sparks from grinding, cutting, etc. are going. Get a few extinguishers.

Good luck with the first "job".

Thanks for the comment but the table was outside the room when I took that picture. The room I'm going to use is empty right now because need to set up some pegboard to hang some c-clamp, etc. Thanks again

P.D. Will get some Fire Extinguisher also

[MMW]

It looks like a basement. Do you have ventilation in the room to the outside? A must when welding a lot. You'll also need make up air. Concrete walls & floor are good.

[GilNewWelder]

It looks like a basement. Do you have ventilation in the room to the outside? A must when welding a lot. You'll also need make up air. Concrete walls & floor are good.

Yep, I'm working on that also

[kevhead63]

Looks like it will be a nice place to work.

[Rezeppa]

Looks great man the only thong thay giys me is you.meed braces on the bottom.of the fixed table or over time due to heat and weight it will warp. I really like it though I wish I had a vise and bench grinder on a floating table.