Looking for a new 200A tig... what do you think?
Results 1 to 4 of 4
Thread: Sincrowave.....or .....Dynasty
-
04-07-2012, 08:30 PM #1
Junior Member
- Join Date
- Dec 2011
- Posts
- 5
Sincrowave.....or .....Dynasty
-
04-07-2012, 08:41 PM #2
Senior Member
- Join Date
- May 2010
- Location
- Central CA
- Posts
- 711
Dynasty DX
I the more I use my Dynasty DX, the more I like it.
Good Luck,
Bob
Edit: I sold my Syncrowave 250 to get the Dynasty.Last edited by Bob Miller; 04-07-2012 at 08:44 PM. Reason: add stuff
Trailblazer 302 Air Pak w/ Wireless Remote
8-RC
Dynasty 200 DX
XMT 350 MPa w/S-74 MPa Plus
Millermatic 211
Passport Plus
30A w/ WC-24
HF-251D-1
Select Lathe
Exact Mill
Spectrum 625 X-TREME
Cutmaster 152
Kalamazoo Band Saw
SX60 Arc Station
FX30 Arc Station
8-Grinders
5-Victor O/A
4- Chop Saws
2-Drill Presses
Lincoln SA-200 Blue Tint Red Face
Lincoln SA-200 Red Face
-
04-07-2012, 09:15 PM #3
Senior Member
- Join Date
- Feb 2012
- Posts
- 561
Sincrowave.....or .....Dynasty
Have both, never use the syncrowave, want to purchase it. Took my Dynasty 200 to manhattan to install a cage today(little stick welding, inside) 50#, 110v can't do that with Syncrowave. $$$ extra if you have the $3000 extra then get the Dynasty 200DX compleat water cooled and get an are cooled torch for easy portability. Or the 280 will be out sooooon er or later, NO 110V
Kevin
-
04-08-2012, 05:08 PM #4
Senior Member
- Join Date
- Nov 2003
- Posts
- 2,019
around and around it goes...
This has been discussed a few times before... and a few times before that....
this thread is worth reading...
http://www.millerwelds.com/resources...-DX-or-DynastyThe more you know, The better you know, How little you know............................. (Old Estonian Saying)
Reply With Quote
