I have a stomp shear in an outbuilding that is too small to shear a 4x8 or 4x10 sheet either way, building is long and narrow. So I built a truck to turn the shear 90° and back again depending on which edge of a sheet I need to shear.
Built a frame to set inside the shear frame.
Hinges for the wheels.
Results 1 to 9 of 9
Thread: Truck or dolly for stomp shear
Threaded View
-
03-22-2012, 12:31 PM #1
Senior Member
- Join Date
- Dec 2006
- Posts
- 612
Truck or dolly for stomp shear
Last edited by pro70z28; 03-22-2012 at 12:46 PM.
Reply With Quote
