Just wanted to show you some of the metal art I do with my Miller Welders. HORKY_35 RS1.jpgPirate Chests T121 - straight bands closed (2) RS.jpg
The first one is a Trellis Birdbath Stand the next one is a Pirates Chest that holds two bottles of wine. If you would like to see more of my work you can see it at cooliron.com.
Results 1 to 5 of 5
Thread: Metal Art
-
02-17-2012, 09:41 AM #1
Junior Member
- Join Date
- Feb 2012
- Posts
- 3
Metal Art
-
02-17-2012, 11:33 AM #2
Senior Member
- Join Date
- Apr 2009
- Posts
- 143
Welcome to the forum!!
the patina on that chest is awesome. are you starting out with new copper sheets and using rusting agents/stains? very cool stuff.'11 Lincoln Power Mig 216
'10 Syncro200 TIG runner
Scotchman CPO 350 LT cold saw w/ AMS
6x6 Enco corner notcher
Weldsale fixture table 3x5
Acorn Welding Platen 5x8
-
02-17-2012, 06:17 PM #3
Member
- Join Date
- May 2011
- Posts
- 44
awesome work- that chest is very cool (as is the birdbath)
i'd be really interested to know the general process for that chest, but feel free to keep your cards close as well
-
02-20-2012, 06:13 PM #4
Junior Member
- Join Date
- Feb 2012
- Posts
- 3
Copper Patina
I buy my copper patina sheets ready to use, don't care to monkey around with chemicals or hazardous waste.
Originally Posted by jimmy_pop
-
02-20-2012, 06:29 PM #5
Junior Member
- Join Date
- Feb 2012
- Posts
- 3
A lot of hair pulling
I designed the whole thing on cad cam. Then I cut it out on my plasma table. The big thing with a new project like this is you have to be willing to throw it out and start over and never give up. I have a big scrape metal pile to prove it.
Originally Posted by Corgan
Reply With Quote
