Hi guys,
made an indoor piece recently- stainless steel frame with a mixed top of jarrah (austrailan hardwood) and merbau (indonesian hardwood)
i am very happy with how it turned out, and i've enjoyed plenty of couch beers on it since its installation in the lounge room. hope you enjoy the pics
Results 1 to 6 of 6
-
02-16-2012, 04:16 AM #1
Member
- Join Date
- May 2011
- Posts
- 44
Stainless and hardwood coffee table
-
02-16-2012, 04:29 AM #2
Junior Member
- Join Date
- Nov 2011
- Posts
- 1
Very nice. How did you get the stainless corners to look like that?
-
02-16-2012, 05:15 AM #3
Member
- Join Date
- May 2011
- Posts
- 44
thanks mate,
i blended the welds off then polished to 320 grit with the angle grinder, before hitting it a spindle mounted wheel made with non-woven abrasive. the ones i get are made by pferd but 3m does them as well.
polish one leg with the wheel, then mask off the corner with some very thin sheet metal and polish the other leg
-
02-17-2012, 08:49 AM #4
Senior Member
- Join Date
- Nov 2008
- Posts
- 164
Absolutely beautiful.
Professional firefighter (retired). Amateur everything else I try to do...
Oh yeah: GO BIG RED!
-
02-18-2012, 02:52 AM #5
Junior Member
- Join Date
- Dec 2011
- Location
- PA.
- Posts
- 3
nice design, very well executed. amazing work..!
-
03-02-2012, 09:45 AM #6
Member
- Join Date
- Oct 2010
- Location
- New Orleans/Northern California
- Posts
- 61
Originally Posted by Corgan
The finish work is really nice. Thanks for sharing your sanding technique. Great work!
Reply With Quote
