hi, could never decide on how I wanted to store the 3/4" pony pipe clamps. Used a recycled piece of 4" pipe with flange, weld plate to inside flange bottom, Dropped 3/4" threaded rod into flange holes and weld, cut 1/4"x2" flat stock 3/4" wide and welded to 1" pipe coupling and then weld to 4" pipe. With inside plate on bottom I store my bar clamps inside the 4" pipe.I should have done this years ago. Takes up very little space and you can spot the length of each clamp.
Results 1 to 9 of 9
Thread: Pony pipe clamp storage
02-04-2012, 11:42 AM #1Senior Member
- Join Date
- Oct 2006
Pony pipe clamp storage
Last edited by BD1; 02-04-2012 at 12:12 PM. Reason: remove pictures