Hi everyone, this is my first post to this forum as I just joined it, but have been visiting it for a while. I just completed a project and thought I would share the idea with others here.I wanted to consolidate 3 welding machine racks and 1 welding station into a self contained mobile (on wheels) work centre so here is what it looks like. Some features are: table top has front edge to clamp grounds onto, holds mig, plasma, and tig/stick machine, has front mounted 120 volt power bar, has all 3 machines plugged in at rear with one power supply extension cord wired to supply 3 - 220 volt and 2 - 120 volt circuits on rear of welding station, right side holds all my home made ABS plastic tig rod holders, left side holds aluminum spool gun cords/hoses, top center above the table top has a rack to hold my vicegrip clamping pliers, one, shelf under the table top holds wire bushes, chipping hammer, safety glasses, 2 grinders, and on the left side the aluminum spool gun controller. The back 2 corners hold the 2 welding gas cylinders which are secured top and lower with chains for safety. There is a bottom shelf to hold the spool gun, extra stick wire, and the tig foot controller. The overall dimensions are 60" long X 40" deep X 42" high (top of table). When I figure out how to attach a photo with my IPad I will post some.
Results 1 to 9 of 9
Hybrid View
-
01-15-2012, 08:34 AM #1
Junior Member
- Join Date
- Jan 2012
- Location
- Ontario. Canada
- Posts
- 5
New welding station and welding machines rack
-
01-15-2012, 09:56 PM #2
Junior Member
- Join Date
- Jan 2012
- Location
- Ontario. Canada
- Posts
- 5
Photos Added
-
01-16-2012, 05:58 PM #3
Senior Member
- Join Date
- Nov 2006
- Location
- Lake of the Ozarks MO
- Posts
- 3,446
wow!
Looks like a nice job to me
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT
Miller 30-A Spoolgun
Miller WC-115-A
Miller Spectrum 300
Miller Spoolmate 200
Miller 225 Thunderbolt
SPEEDGLAS 9100XX
-
01-16-2012, 07:07 PM #4
Senior Member
- Join Date
- Nov 2003
- Posts
- 2,019
I agree wholeheartedly.... a well thought out , well executed piece of work....
Originally Posted by FusionKing
wow!
Looks like a nice job to me
WELL DONE!!!...............The more you know, The better you know, How little you know............................. (Old Estonian Saying)
-
01-16-2012, 08:16 PM #5
Junior Member
- Join Date
- Jan 2012
- Location
- Ontario. Canada
- Posts
- 5
Welding station
Thanks for the nice comments. There are lots of great project on this forum.
-
01-19-2012, 04:47 PM #6
Member
- Join Date
- Jan 2012
- Location
- goldsboro north carolina
- Posts
- 42
great job i may justa have to make one of my own
Reply With Quote
