Ya, My plasma cutter was purchased in 2008. Ser.# LH440 196P
...... Norm
Results 11 to 12 of 12
Thread: millermatic 130
-
09-16-2009, 05:48 PM #11
Senior Member
- Join Date
- Jul 2008
- Location
- Delhi, Ontario:
- Posts
- 1,950
Manufacture Date
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Spoolgun.
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
www.normsmobilewelding.blogspot.com
-
09-18-2009, 09:31 AM #12
Member
- Join Date
- Feb 2008
- Location
- Western NY State
- Posts
- 41
Miller Welder
I bought the 130 XP more than five years ago and it has been very reliable. Some friends went with the cheap offshore machines and were sorry. After w20 years with a Miller AC machine all the moving parts in the Mig machines worried me so I decided to go with what I thought was the best machine and it has worked well. One thing to consider is whether to go one step higher with the 220 volt machine. I have used one and it burns considerably hotter. No trade is in sight though because I have a big Linde Mig machine and that takes care of anything needing more juice.
Good Luck!Bill
Miller Mig 130XP
Linde VI206 W/Mig
Miller Econotig
L Tec Plasma PCM32i
Pneumtic Forging Hammer 75#
Mechanical Forging Hammer 65#
Propane Forge
Makita Chop Saw
Bader 72" Belt Grinder
Bader Knockoff 72" Belt Grinder
Milwaukee Portoband
Reply With Quote
