I need to build a tool rack for stick welding. I would like to have a spot for a slag hammer, rods, brush, and stinger. If anybody has any ideas that would be great! Thanks!
Results 1 to 7 of 7
Thread: tool rack
-
04-17-2012, 02:39 PM #1
Junior Member
- Join Date
- Apr 2012
- Posts
- 5
tool rack
-
04-17-2012, 05:30 PM #2
Senior Member
- Join Date
- Oct 2006
- Location
- Illinois
- Posts
- 460
hi, I made this with some scrap I had. You maybe able to adapt to your needs. My table has holes on the perimeter so I can move it anywhere. I have small sledge, files , chip hammer, brush and square to right and assorted ''C" clamps on the bar in back. The inside holds chisel ,soapstone, tape , and what ever.
P1000362.jpgP1000364.jpg
-
04-19-2012, 09:21 PM #3
Junior Member
- Join Date
- Apr 2012
- Posts
- 5
Hard to picture exactly what you mean but thanks for the reply. No one else seems to care hahaha.
-
04-20-2012, 06:05 AM #4
Senior Member
- Join Date
- Oct 2006
- Location
- Illinois
- Posts
- 460
did you open the pictures ?? Click on the BLUE attachments .
-
04-20-2012, 10:58 PM #5
Junior Member
- Join Date
- Apr 2012
- Posts
- 5
I don't see any attachments. I'm new to this forum so is there something im missing?
-
04-20-2012, 11:02 PM #6
Junior Member
- Join Date
- Apr 2012
- Posts
- 5
Haha I found it. Looks like a good idea. Probably won't make the same exact thing but I like the part for the files and hammer. Thanks for posting the pics. Its nice that someone cares! Thanks again!
-
04-21-2012, 06:26 AM #7
Senior Member
- Join Date
- Oct 2006
- Location
- Illinois
- Posts
- 460
GLAD you saw it. I made that and posted it on another site . Here's that site and the posting.
http://weldingweb.com/index.php
http://weldingweb.com/showthread.php?t=64556&page=6
http://weldingweb.com/showthread.php?t=107161 Welders finger or third hand. You might want to make one of these too.
Reply With Quote
