I've got a lead on a Hobart Tigwave 250 that I can have for next to nothing, needs leads. Never done any TIG but have wore out a few MIG's . Can any one offer any advice about this machine, good,bad,or ugly? Thanks!
Results 1 to 3 of 3
Thread: Question About a Hobart Machine
12-01-2011, 04:55 PM #1Junior Member
- Join Date
- Apr 2011
Question About a Hobart Machine
12-01-2011, 07:02 PM #2
now a Thermal Arc Tigwave 250
Nothing the matter with that machine ..it is a square wave chopper... about equivalent to Sync 250 of the same vintage... makes an excellent tig machine... I bought one new about 17 years ago and still have it as a backup machine..... (all 375lbs of it)
When Miller bought Hobart... they divested themselves of some Welder models... and the manufacturing facilities.... So Thermadyne bought that line and the rights to manufacture...
it is now a Thermal Arc Tigwave 250... here is a link to the Manual
it looks like they have discontinued that model...
Last edited by H80N; 12-01-2011 at 07:31 PM. Reason: clarity...
The more you know, The better you know, How little you know......
“The bitterness of poor quality remains long after the sweetness of low price is forgotten”
Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...
My Blue Stuff:
Dynasty 350DX Tigrunner
Millermatic 350P w/25ft Alumapro & 30A
TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam..
12-04-2011, 06:14 PM #3Senior Member
- Join Date
- Sep 2005
- 16919 Pole Rd. Brethren, MI 49619
You got the service to run it,,, its near free, wtf.