Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Page 2 of 12 FirstFirst 1234567 ... LastLast
Results 11 to 20 of 113
  1. #11

    Default

    The last 4 for now..

    Used some 2" and 2.5" 3/16 wall square tubing to make some brackets for mounting a removable bench grinder and vice on the end of my welding table into a receiver style setup.

    1 is the mount for the grinder

    2 is the receiver portion with hole for the retention pin and 2- bolts in tapped holes that when tightened take the slop out of the system.

    3 grinder all set up

    4 grinder and vice stored out of the way so that the entire welding table is open.

    Thanks for looking

    Mark
    Attached Images Attached Images

  2. #12
    Join Date
    Dec 2007
    Location
    two rivers wi.
    Posts
    23

    Default

    Quote Originally Posted by badassb5 View Post
    WOW I looked at the chevelle pics. Amazing work, I mean world class. Very nice.
    Thank you for the nice compliment.

    Rob

  3. #13
    Join Date
    Dec 2007
    Location
    two rivers wi.
    Posts
    23

    Default

    Heres some more goodies.

    http://www.1969supersport.com/jigs.html

    Rob

    __________________
    "There are questions to be answered, and answers to be questioned"


    Jigs, sandblasting, shop, paintroom, rotisserie, pictures, little bit of everything.
    http://www.1969supersport.com

  4. #14
    Join Date
    Dec 2007
    Location
    two rivers wi.
    Posts
    23

    Default

    This will double the life of a disc, ( almost )

    http://www.1969supersport.com/tls.html

    Rob

    __________________
    "There are questions to be answered, and answers to be questioned"


    Jigs, sandblasting, shop, paintroom, rotisserie, pictures, little bit of everything.
    http://www.1969supersport.com

  5. #15
    Join Date
    Dec 2007
    Location
    two rivers wi.
    Posts
    23

    Default

    Yeah, I know i have way to much time on my hands, but it keeps me out of the tavern.

    http://www.1969supersport.com/dog1.html

    Rob

    __________________
    "There are questions to be answered, and answers to be questioned"


    Jigs, sandblasting, shop, paintroom, rotisserie, pictures, little bit of everything.
    http://www.1969supersport.com

  6. #16
    Join Date
    Jan 2007
    Location
    Montana, USA
    Posts
    233

    Default

    Quote Originally Posted by rubadub View Post
    Heres one for you guys, its to do with ventilation in your shop or garage to get welding fumes out.

    I use it it for welding fumes, plus my home made paint booth.

    Anyway the vents are insulated, because i live in Wi. But I also use an air conditioner once in a while in the summer.

    This is on the first five pages of this,http://www.1969supersport.com/paintroom.html the pictures are scattered around a little, but you can see the insulated vents. Anyway, for whats it worth.

    Rob
    __________________
    "There are questions to be answered, and answers to be questioned"


    Jigs, sandblasting, shop, paintroom, rotisserie, pictures, little bit of everything.
    http://www.1969supersport.com
    Wow! Obviously, you do not suffer from ADD, like some of us. Am very envious of your organizational skills, and sure do appreciate that you took the time to document and post some of your accomplishments. Nice work!
    Goodhand

    __________________
    "There are questions to be answered, and answers to be questioned"


    Jigs, sandblasting, shop, paintroom, rotisserie, pictures, little bit of everything.
    http://www.1969supersport.com[/QUOTE]

  7. #17
    Join Date
    Oct 2006
    Location
    Mpls, MN
    Posts
    1,790

    Default

    Rob, and everyone else...

    Rather than using angle bolted to the ceiling, you should use electrical strut instead.

    This stuff is super strong, and comes with slots for easy installation on standard spaced studs. HD has it in stock for about 13 bucks for a 10'er.

    The rolled edges are made for a plethora of standard brackets and nuts, but can also work to hook your wire hangers on as well.

    http://www.tnb.com/ps/pubint/index.cgi?a=get_sub&cid=9

    http://www.tnb.com/contractor/docs/superstrut.pdf
    Syncrowave 250DX
    Invison 354MP
    XR Control and 30A

    Airco MED20 feeder
    Thermal Dynamics Cutmaster 81
    Smith O/A rig
    And more machinery than you can shake a 7018 rod at

  8. #18
    Join Date
    May 2006
    Posts
    180

    Default

    Here's a shot of the bandsaw cart I designed and tigged together to replace the backbreakingly low legs the saw came with from the manufacturer. It can be disassembled into three pieces (apart from the saw) for saw storage or transport. The casters are bolted on (not welded) for easy replacement.
    Attached Images Attached Images
    Miller XMT-350 CC/CV
    Miller S-22A wirefeeder
    Bernard 400A "Q" gun
    Miller 30-A Spoolmatic w/WC-24
    CK 210 & WP-18 GTAW torches
    Hypertherm Powermax 30
    O/A Rig, Enco 4x6 bandsaw, etc.

  9. #19
    Join Date
    Dec 2007
    Location
    two rivers wi.
    Posts
    23

    Default

    [QUOTE=Goodhand;26163]Wow! Obviously, you do not suffer from ADD, like some of us. Am very envious of your organizational skills, and sure do appreciate that you took the time to document and post some of your accomplishments. Nice work!
    Goodhand

    Your welcome Goodhand

    Rob

    __________________
    "There are questions to be answered, and answers to be questioned"


    Jigs, sandblasting, shop, paintroom, rotisserie, pictures, little bit of everything.
    http://www.1969supersport.com

  10. #20
    Join Date
    Dec 2007
    Location
    two rivers wi.
    Posts
    23

    Default

    Quote Originally Posted by Fishy Jim View Post
    Rob, and everyone else...

    Rather than using angle bolted to the ceiling, you should use electrical strut instead.

    This stuff is super strong, and comes with slots for easy installation on standard spaced studs. HD has it in stock for about 13 bucks for a 10'er.

    The rolled edges are made for a plethora of standard brackets and nuts, but can also work to hook your wire hangers on as well.

    http://www.tnb.com/ps/pubint/index.cgi?a=get_sub&cid=9

    http://www.tnb.com/contractor/docs/superstrut.pdf
    Good idea, I never thought about using it.

    Rob

    __________________
    "There are questions to be answered, and answers to be questioned"


    Jigs, sandblasting, shop, paintroom, rotisserie, pictures, little bit of everything.
    http://www.1969supersport.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.