I build the engines for an Alfa Romeo spider that we've been running at Bonneville for the last 10 years. We started with an Alfa transmission, but quickly found out that it couldn't handle the horsepower of the turbocharged engine . . . so the replacement (Muncie M22) required a custom bellhousing. I also decided to move the starter behind the ring gear to make room for a larger intercooler.
Here's the finished product . . . made from 1/4 inch mild steel.
Results 101 to 110 of 113
01-30-2009, 12:05 PM #101
01-30-2009, 04:29 PM #102
I dont know man, looks a bit weak. LOL
That thing is a work of art, very nice JOB!!!Be safe
Give more than you get and
you will get more than ya need.
This is true for the good and bad
that life puts out.
02-02-2009, 03:18 PM #103Junior Member
- Join Date
- Jan 2008
- east central il
02-02-2009, 06:46 PM #104Junior Member
- Join Date
- Jan 2009
This is about the only thing that ive made up mostly by myself.serious welder lol!!!!
hobart 140 handler
dewalt mitor saw
dewalt drill gun
a nice hammer
and some clamps
02-02-2009, 08:26 PM #105
If that had...
If that had hay or insulation in it, and no door it would be quiet a big doghouse. My heighbors would s*&^ it they saw soething that big on my street. I love it though! Big green mailbox.Bobcat 225
An assortment of
other tools and toys.
The one DANO!
02-02-2009, 09:17 PM #106
02-03-2009, 03:02 AM #107Member
- Join Date
- Feb 2009
- San Diego, CA
Gas Can Hauler
I made a gasoline can hauler that fits a 2" receiver few weeks ago. I hate hauling gas cans inside a SUV. It's also useful on the pickup, you don't need to tie the cans to the bed of the truck.
It was quick and cheep to build. The angle iron is a used bed frame, very hard to drill holes in it but it welded up fine with 6011 rods. Even used one of the hinged section from the bed frame to lock the two 5 gallon cans in place.
02-03-2009, 04:19 AM #108
02-04-2009, 07:38 AM #109
I decided to build a machine to pluck chickens after trying to do a few by hand. When I started building it I had no specific plans and just started welding the frame from what I had imagined I wanted it to look like. I had researched it a lot so I knew what I wanted, just didn't know how it would turn out exactly. I was very happy with the end result. This is the finished product but I have more pictures and video links on my signature.
02-04-2009, 10:15 AM #110
[QUOTE=moto-scoot;175582]I made a gasoline can hauler that fits a 2" receiver few weeks ago. I hate hauling gas cans inside a SUV. It's also useful on the pickup, you don't need to tie the cans to the bed of the truck.
It was quick and cheep to build. The angle iron is a used bed frame, very hard to drill holes in it but it welded up fine with 6011 rods. Even used one of the hinged section from the bed frame to lock the two 5 gallon cans in place.[/QUOTE
When you fill the cans, do you remove them from the rack and place on the ground to fill?Nick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
60" X 60" router/plasma table
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff