we are looking for qualified fabricators that want to build smokers to join our program. here is a link to get in touch with us...
Results 1 to 10 of 10
10-20-2011, 06:28 PM #1
We need some qualified fabricators!
10-20-2011, 09:30 PM #2Member
- Join Date
- Jan 2011
- Nolalu (near Thunder Bay) Ontario, Canada
No you aren't. You are advertising your websiteGordie -- "I believe you understand what you think I said, but I'm not sure you realize that what you heard is not what I meant."
10-20-2011, 10:26 PM #3
i am advertising my site... but i am also trying to find builders for my customers who buy my plans.
I figured this would be a great place to find fabricators like myself and turn some work their way.... if you're offended at that, i will withdraw my offer.
maybe you dont need the business?
10-20-2011, 10:29 PM #4
11-06-2011, 04:32 PM #5
11-06-2011, 06:20 PM #6Senior Member
- Join Date
- Aug 2006
- Plainview, TX
Critizism Is Justified
You are BLATANTLY Advertizing your Website on this forum and you show you don't know anything about smoke or the transfer of heat.
In order to get heat transfer and smoke the full length of the smoker, the stack needs to be on the oposite end of the smoker from the fire box. The firebox is the highest source of heat and anything close to it will cook at a higher temperature. That is why some of the best smokers are so long and have multiple hatches for the placement of different meats. Also, the Verticle Warming/Heating cabinet, should be at the opposite end of the smoker from the firebox. One of your designs shows the cabinet directly above the firebox, the hottest place on the entire unit.
You won't get anyone from Texas to build for you because there are WAY TOO MANY Smoker manufactures here already. There are about 25 in the Texas Panhandle alone and some of the best are made wherever the steel distributors are located around the state. Also, the best smoker use heavier metal than 1/4" steel, moe like 3/8" and 1/2" on the cooking chamber, helps with heat retention and control.
Furthermore, you have chosen to advise people to cut on one of the most dangerous items to ever cut on, PROPANE TANKS. Yes, people have successfully cut these tanks, using extreme caution and practices many people may not fully understand. However, many people have been hurt cutting propane tanks, even using the best known practices for safety.'77 Miller Bluestar 2E on current service truck
'99 Miller Bobcat 225NT for New Service Truck
'85 Millermatic 200 in Shop
'72 Marquete 295 AC cracker box in Shop
'07 Hypertherm Powermax 1000 G3 Plasma Cutter in Shop
Miller Elite and Digital Elite Hoods
11-06-2011, 06:47 PM #7
well I sure didn't expect that kind of a reply.
I tell ya what, I have been smoking meat on this style of smoker for many years. If you actually do some research on the "Reverse Flow" style smoker, and if you would have actually read the Blog article I wrote telling you some of how they work you would not have accused me of being a fraud. you may be from texas, and there may be many builders there that also build smokers, but you really should try to understand these things before you start a flame war over this.
Don't take my word alone for the reverse style smokers. ask some of the other members on here about how they perform. You know nothing of my credentials and furthermore you know nothing of my experience in this field. as far as the safety factor of cutting the propane tank open, if it is full of water, HOW may I ask will it "blow up" or "catch on fire"? also you know nothing of my credentials or experience with this either.
I am advertising my website to a point on this forum, but only to that point...
I am offering an opportunity to fellow fabricators, who I may point out may be suffering from the economy and simply trying to keep their businesses on the road. this opportunity could be used as a tool to add a significant income to their situations. I have not tried to use this thread as a source of income for me, or to drive potential customers to my site. I have only linked to a single post that contains a contact form that may be used to contact me. I have noty made continuous posts on here to try to "sell" anything to anyone. I have a total of 5 posts now including this one, of which 3 of them are defending my purpose with this post.
if the site managers wish to remove this thread and even my membership, so be it. I still will welcome anyone from this community to participate in our program.